Hunting is not an easy feat to perform. If you are a novice, it may be even harder for you. There are so many things to consider.
For your gears, you can look around online, surely you will see very many things that will help you with your hunting needs.
But, when it comes to preparation, no amount of devices and gear can prepare you mentally for a hunt. You need help.
This is what we are doing. Today we will discuss the precautions of hunting from a Treestand and the things you should consider and prepare for.
Location
As with any project involving real estate, the most important factor to consider- location; there’s no denying that the choices are nearly limitless; thus, to identify the “perfect site,” you’ll need to utilize every scouting technique known to man.
Beginning scouting efforts online with Google Earth or any other online mapping tool and then spending hours in the field is how you should plan your hunt. It is estimated that 25 percent of a particular region is responsible for 75 percent of deer activity. The use of this method of analyzing topography allows you to rule out numerous marginal regions swiftly and, at the same time, hone in on the smaller zones that are home to the majority of the activity.
Planning
The following three main components will need to be identified in your chosen location: sleeping spaces (for security cover), feeding places, and transportation routes. By focusing your scouting efforts on these principles, you’ll be able to observe the “big picture” of how deer travel through the terrain much more quickly and easily. The simplest method is to connect the dots between sleeping places and feeding areas and then analyze the transit corridors in between to identify the most advantageous ambush sites.
Research
Following that, it’s time to go on a reconnaissance mission along with these transportation networks. Slow down and take great note of the topography and ground cover as you go through this process. You’ll discover that the “laid of the land” is the most important element in determining the pathways deer use to get from one bedding location to another and from one eating spot to another. It is now your responsibility to identify the most promising treestand locations along these paths and report back to the group.
Placement of Treestand
A discussion on treestand placement would be incomplete if it did not cover the most fundamental requirement: a suitable location for the stand. To put it another way, do whatever it takes to gain access to good hunting grounds, and then spend as much time as possible studying all you possibly can about them.
No matter whether you are hunting on public or private land, simply spending a lot of time exploring a new area may help you get a “feel” for how the local deer are interacting with the environment. Through this process, you will soon be able to select the greatest locations for your aim of getting the best game in the zone.
Selecting the right Treestand
Almost always, you’ll come across several interesting options that appear to have advantages in some areas and drawbacks in others, depending on your perspective. It’s only natural that there will be some educated guesswork involved at this stage of the process. We want to prioritize stand locations based on how effectively they will provide productive shot opportunities, so we’ll be making educated guesses about how effective they will be.
Features of Treestand
Ultimately, all you can do is go through the checklist of desired characteristics and determine whether or not a particular location meets the criteria for consideration. Weigh the pros and cons of each tree under consideration.
How does the prevailing wind direction move through the area with expected deer approach and exit routes?
What will the temperature be like on a calm morning or evening?
Does your chosen tree have any natural barriers that prevent deer from getting too close to it?
Does the tree provide chances to shoot in terms of the surrounding area, and how much trimming will it require?
Look more closely at some of these issues and consider how we might more effectively address them.
Selecting the Right Tree
There are often too many deficiencies in a tree. Better to simply move on to another candidate who is close by and repeat the procedure. The majority of the time, You can find a tree that will work; however, there are times when you must accept that the location is not going to work out as it is.
Is it possible to make it work with a large amount of off-season trimming and cutting?
Is it possible to create acceptable conditions with only a minor amount of trimming for the time being?
Take into consideration the time of year when the hunt is done, and always exercise extreme caution during hunting season for obvious reasons.
Climbing Route
Following that, look for the most direct route into and out of the Treestand. Clear the path of debris with a rake or a leaf blower to avoid tripping.
Alternatively, creeks and/or ravines can be used as access points. In addition, insist on scraping all of the debris away from the bottom of the tree so that you don’t make any unnecessary noise while organizing your gear before and after the climb.
If everything goes according to plan, Treestand should be approximately 20-25 feet above the ground, with excellent background cover to break up your silhouette while hunting.
Emergency Food and Shade
The amount of time you spend in a treestand is the single most important factor in determining the productivity of a particular location. Make sure you have enough food, clothing, and entertainment to keep you comfortable and occupied for the duration of the session.
Prioritize Comfort
Make your treestand seat and platform more comfortable. Devoted deer hunters tend to spend a significant amount of time in their treestands, either sitting or standing. Although it is essential that stands be quiet, it is also important that they be comfortable.
Add an extra seat pad, such as a Hunt Comfort cushion with a gel insert, to make the car more comfortable. Attach a piece of carpet to the platform floor with a staple gun. This provides an additional level of quiet as well as a measure of comfort when standing for extended periods.
Choose your weapon wisely
If you are bow hunting, you should utilize a bow holder. While it may appear plausible to keep your bow in the ready position during the hunt, doing so can be extremely exhausting and perhaps hazardous when using a nocked arrow. Bow holders can be attached to the front end of the platform of the stand. Various other types of holders are attached to the tree by straps or screws, and they support a rotating arm with a hook at the end that allows the bow to be kept close at reach.
However, when a shooting bar is brought down, the shoulder strap may typically be wrapped across the front of the bar to provide rapid access for gun hunters.
It is okay to fail
Finally, never fall into the trap of believing that you are invulnerable to making a mistake. It is unavoidable that we will make poor decisions about where to place our treestands from time to time. If this occurs, simply yank the stand and move it to a different location before attempting it again. Remember that every failure is an opportunity to learn something new, and even in a fantastic deer-hunting area, it’s rare to get a “perfect” treestand set up on the first try.
Final Words
These tips are collected from experts on hunting and outdoor animal sighting. We hope you can utilize these tips for the best hunting experience.